November 22, 2026, 08:48:34 pm
Username:

Password:

Topic: improved flamer mk3  (Read 19677 times)

jacky

  • Supporter
  • Posts: 344
    • View Profile
Re: improved flamer mk3
« Reply #30 on: September 12, 2013, 05:48:07 am »
So flamer mk3 would be perfect. I don't know why but flamers were only usless bg in game. They should kill anyone with 2-3 burst with out any problem. They should deal 120-150 damage per burst vs guy in ca mk2. We could boost Ncr ca fire resist to balance weapon=armor rock and paper

Gooseberry

  • Posts: 126
    • View Profile
Re: improved flamer mk3
« Reply #31 on: September 12, 2013, 07:11:11 am »
The flamers in Reloaded are probably the best I've seen them in an iteration of FOnline so far. I've experimented with a lot of Flamer-based builds in old 2238 and in TLA Mk2.

The problem with the Flamer is that you need a specialized build (2 pyromaniacs) to use it even close to effectively in pvp, and if you want to do more than 1 Flamer "burst" in succession it's required that you have Jet (a huge nerf in and of itself) or 2 Action Boys. Taking 2 action boys means sacrificing some perks that are really useful in close range combat (like Lifegiver), this is where the Flamer has its only chance to do damage.

When the change happened that made all Big Guns take 7 AP to use (rather than 6 AP like in Fallout 2, as well as removing the effect of Fast Shot on big guns), the developers obviously didn't think hard enough about what that does to the lower end of the category, it was done in the name of "they are all big guns durr" (let's completely forget the fact that Flamers also used to take 6 Strength to use rather than the 7 in 2238) rather than in the name of "balance".

Where the M60, LSW, Miniguns and Rockets make sense in having a high AP cost because they are so damn powerful and versatile in comparison, the Flamers got the shit end of the stick and were never developed any further than making you have to take 2 perk slots to be effective with them.

At the range where the Improved Flamer does damage, any other Big Gun can put out a similar amount of damage in the same amount of time due to the same AP cost, whilst still having a 27-hex+ range advantage. Or if you run through their first flame while they are waiting for the few APs for the second one, you can one-hex them for three times their damage.

I have given plenty of feedback on this subject in the old 2238 forums with extensive knowledge on the subject after having many flamer builds, and the AP cost being equal to that of an Avenger or M60 is the only problem I can see with them in Reloaded after the range buff. I wouldn't go as far as to make Flamer Mk3's with penetrate perks and other shit to balance a gun that only needs a reduction of 1 AP to become a viable short range damage dealer in pvp.

And yes, I know -1 AP special crafts exist, point is that no build should rely on a random stat roll on a hard-to-find-blueprints-for and possibly hard to craft weapon for a build to be effective in pvp, it should be treated as a bonus rather than a way to make it viable. On an M60 or Avenger you don't need -1 AP on it to do enough damage to take down your opponent quicker than they can you, on an Improved Flamer vs higher level armors it is a requirement.

TL;DR: Only buff flamers need is Improved Flamer -1 base AP cost, suddenly enhanced viability in close range combat with specialized builds, keeping their users toe to toe with other Big Gunners if they use the location to minimize the range disadvantage.

Sincerely hope Kilgore reads this and ignores opinions of people who have no idea what they're talking about.

In your wall of text you state that there are many factors that make flamers terrible compared to avengers.
The AP cost, the damage, the range and the ability to 1hex.

I think a simple -1 ap for improved flamers isn't going to cut it. A craftable mk3 flamer is simply needed. Since it will offer that -1 ap, extra damage and a penetrate perk for use in pvp which will make it viable.

Keep in mind. In my opinion the weapon should be craftable as weapons like the avenger are. And it should be in the same category of power. The flamer mk3 shouldn't be some holy hand grenade weapon which makes people shudder when it enters the battlefield.
It simply has to be a weapon which is worth building a character around. and at the current state, it's not the case.

jacky

  • Supporter
  • Posts: 344
    • View Profile
Re: improved flamer mk3
« Reply #32 on: September 12, 2013, 08:01:23 am »
maby you are right:
recipe: flamer mk2 + 2hq alloy +2ele part 1+hq ele part
any comment from Kilgore?
« Last Edit: September 12, 2013, 08:07:56 am by jacky »

Nark

  • Posts: 18
  • Anti-Russian Wasteland Hero
    • View Profile
Re: improved flamer mk3
« Reply #33 on: September 12, 2013, 05:06:37 pm »
-snip-

It takes 3 alloys and 1 wood to craft a flamer, just craft them until you get a -1 AP (literally takes 2 tries). Once you do that, upgrade it.

not that hard
I don't think you understood anything I just wrote. Do the same for a Minigun into Avenger and you have a superior weapon at 1 hex and a superior weapon in all the ranges where a Flamer can't reach. Bulk-craft M60s until you get a -1 AP one, they're cheap too, probably the best Big Gun in the game.

Making an Improved Flamer have 1 less base AP than every other Big Gun enables it to have a much higher damage output in a shorter amount of time, especially (but not be restricted to) if they had a variant with -1 AP stat buff on it.
« Last Edit: September 12, 2013, 05:11:28 pm by Nark »
Quote from: Zogra
THIS IS NOT BETA THIS IS SPARTA
ARWH. Scummers to the end.

jacky

  • Supporter
  • Posts: 344
    • View Profile
Re: improved flamer mk3
« Reply #34 on: September 13, 2013, 06:42:31 am »
i know what you mean but still we can boost flamers and mk3 model can be perfect.
they can be even better if they will be craftable. mk2 with bonus should be on same lvl like regular mk3. I will make some simple calculation how they should work (% of damage can be different in game, but this is just simulation of idea)

mk1 -100%
mk1 + bonus - 125%
mk2 - 150%
mk2 + bonus - 175&
mk3  - 200%
mk3 + bonus - 225%
« Last Edit: September 13, 2013, 06:45:16 am by jacky »

Celard

  • Supporter
  • Posts: 49
    • View Profile
Re: improved flamer mk3
« Reply #35 on: December 16, 2013, 03:26:46 pm »
The only thing which needs eventual improved Flamer mark 3 it will be bigger range for example 12-15 but it may be overkill..

plazmafried

  • Wiki Editor
  • Posts: 24
  • wiki editor
    • View Profile
    • random stuff
Re: improved flamer mk3
« Reply #36 on: December 17, 2013, 06:26:56 am »
perhaps what jacky really wants is this http://fallout.wikia.com/wiki/Heavy_incinerator_(Fallout_3)


rather than make another flamer, make a different version which is lower damage but a higher range

i think maybe 30 hex would be reasonable

damage and such should be balanced based on range i think.

jacky

  • Supporter
  • Posts: 344
    • View Profile
Re: improved flamer mk3
« Reply #37 on: December 17, 2013, 07:19:28 am »
Nope, I want bigger dmg and +2 to range

drot

  • Posts: 169
  • I like NCR
    • View Profile
    • Rawhide
Re: improved flamer mk3
« Reply #38 on: December 18, 2013, 05:27:33 pm »
Buff the Improved Flamer further, I don't see the need to create a new weapon.
#rawhide on ForestNet

Celard

  • Supporter
  • Posts: 49
    • View Profile
Re: improved flamer mk3
« Reply #39 on: December 18, 2013, 06:02:01 pm »
I agree with plazmafried. Heavy incinerator from Fallout 3 is what is needed. For now flamer (range 8 hex) is almost close combat weapon. With bigger range it might be more usefull, but range cannot be higher than the range of the pistols (physical matters). So max range 15-20 (better less) and dmg cant be bigger than improved flamer cause it might be simply not fair. Improved flamer had the biggest dmg in Fonline (acording to wiki) and any armor in the game has less resistance to fire than normal resistance (except power armors). Biger range and dmg might cause that everyone will be flown with a flamethrower

Strike

  • Guest
Re: improved flamer mk3
« Reply #40 on: December 18, 2013, 07:34:13 pm »
Buff the Improved Flamer further, I don't see the need to create a new weapon.
Yes, maybe just Improved Flamer with range 10. Everything else seem good, damage is pretty good with MKII fuel.

Normal flamer is fine with 8 range.

Edit: Flamethrower isn't suppose to be long ranged weapon, this is prove in many games.
« Last Edit: December 18, 2013, 07:43:04 pm by Strike »

jacky

  • Supporter
  • Posts: 344
    • View Profile
Re: improved flamer mk3
« Reply #41 on: December 18, 2013, 11:54:15 pm »
I want +1/2 range and bigger dmg. I want to see flamer builds in tc like in tla mk2

Adams

  • Posts: 100
  • Bang Bang Smash ty buzerant
    • View Profile
Re: improved flamer mk3
« Reply #42 on: December 19, 2013, 01:27:46 am »
Flamer is good as it is.

emerald

  • Posts: 11
    • View Profile
Re: improved flamer mk3
« Reply #43 on: December 25, 2013, 10:11:36 pm »
+1 to improving flamers

ShOw.

  • Wiki Editor
  • Posts: 115
  • Who do you think you are?
    • View Profile
Re: improved flamer mk3
« Reply #44 on: December 26, 2013, 11:27:17 am »
please think about upgraded version of flamer, to brink them to pvp. you know how they work in tla mk2 and it would be good to see them here.

1+ i like this idea.. No flamer builds around and never seen them on PvP,TC.. they can do some damage and if pyromaniac will be (or is i dunno) reworked then fire type can do good dmg agaist CA..


Wasteland smiles on us..


War war never changes.